My shopping cart

You have no items in your shopping cart.

Compare List

Full Details

Phillips Screwdriver

Black Oxide, Bead Blasted


Phillips head screws are no match for this driver component.


* Required Fields

  • 1
  • 2
  • 3
  • More images


  • Overview
  • Full Details
  • Reviews
  • Add to cart

Full details


Phillips head screws are no match for this driver component.

Available in Bead Blasted or Black Oxide finish.

Compatible with:

  • PowerLock
  • EOD PowerLock
  • PowerAssist
  • Paratool
  • Pocket PowerPlier
Product Type Multi-Tool Component Finish Black Oxide, Bead Blasted
Country of Origin N/A    
Product Type Multi-Tool Component
Finish Black Oxide, Bead Blasted
Country of Origin N/A
  • Overview
  • Full Details
  • Reviews
  • Add to cart
  • Overview
  • Full Details
  • Reviews
  • Add to cart

Customer Ratings & Reviews

Phillips Screwdriver is rated 2.0 out of 5 by 18.
Rated 1 out of 5 by from Snapped when used as intended I was removing a screw from a board and the screwdriver shattered. Somehow this isn't covered by the warranty. Caveat emptor!
Date published: 2017-09-15
Rated 1 out of 5 by from Poor design The Philip's head bit snapped in half during routine use. SOG informed me that it was not covered under warranty, and I would be required to pay for a replacement bit. When examining the bit more closely, it should have been obvious to me that this part is poorly designed. Also, many other reviews have have pointed this design flaw out. If SOG continues to sell this without a redesign, they should at least provide a free replacement.
Date published: 2017-01-30
Rated 1 out of 5 by from Easily broken Mine worked OK on very light applications, but the first time it found a stuck screw it snapped off without warning. This is poorly made compared to my older Paratool Phillips driver, I hope they return to that version.
Date published: 2017-01-16
Rated 1 out of 5 by from Snapped right off at the base Garbage. This is the only tool on my Powerlock EOD that is broken. It's sad that one of the most common tools you'll use on this tool is so easily broken.
Date published: 2016-12-14
Rated 5 out of 5 by from Superb product! I have had my SOG Multi Tool for about 5 years. I broke the Phillips when using it to pry open the cover to an electric panel (Do NOT use screwdriver as a pry bar). SOG makes it easy to replace tools in a snap - 2 minutes and it was ready to go. Thank you, SOG!
Date published: 2016-11-29
Rated 5 out of 5 by from Great fit Looks stronger then original . Good time jjjjjjjjjj
Date published: 2016-08-06
Rated 1 out of 5 by from Snapped on first use like the others. Have had SOG Powerlock for some time but the first time I used the Phillips bit it snapped off at the radius where it joins the mounting base. Given the number of one-star ratings, this isn't a unique situation. As a general guess someone forgot the part of engineering where they tell you about hardening steel that has stamped lettering (making the section thinner and providing a failure initiation site) at a stress riser - a fatal combination. Now the question is "Will they respond to so many failures?". I'm sending mine back for warranty service as this kind of failure is both preventable and unacceptable.
Date published: 2016-06-19
Rated 4 out of 5 by from Awesome service I purchase a Phillips screwdriver for my POWERASSIST multi tool. I needed spacers to accommodate the switch from awl to Phillips and spacers were promptly provided with no hassles! Thank you SOG
Date published: 2016-06-19
  • y_2017, m_10, d_15, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_en_US, sid_200-100, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_sog

You Are Engraving:

Your browser does not support canvas.

Own It

Personalize your SOG

Your Options:

  • Text
  • Image

Add Text Engraving

+ $12.00

Chars left
Lines left

Additional Formatting:

Font Face

Font Size



* Any colored jpeg, png and gif files are accepted. Colored images will be converted into black and white bitmap file. High-res or vector with black & white or white/no background images are more preferred.

You should select valid image files only!

An error occurred while uploading the file

The upload has been canceled by the user or the browser dropped the connection

Your file is very big. We can't accept it. Please select a smaller file

You uploaded:


Pricing & Info


Engraving with text

$12 per engraving item

Engraving of two lines of text up to 24 characters per line. Fonts available are Arial , Times , Black Chancery , and Phoenix Script. Location of engraving will be on the blade near the handle and as large as practical for the blade it is being engraved on.

Back to Top

Engraving with Logo/Graphic

More advanced designs such as company logos will require a onetime artwork setup fee of $50.00 in addition to the per engraving charge. Engravings that have large solid filled areas may require additional charges. For more information, please see section on camera-ready artwork requirements.

Back to Top


Guidelines for uploading a logo/file

  • A high-resolution digital file is required for set-up. The file must be one of the following formats: Jpeg(.jpg), Adobe Illustrator(.ai), EPS or PDF.
  • All files must be Black & White
  • High resolution (150 dpi or higher)
  • All files must be less than 3MB.

Back to Top


What is not applicable logo/graphic to upload

We do not consider photocopies, business cards, faxes, letterhead or other imprinted products to be camera-ready artwork. Our art department can work from these items to create your finished artwork at an additional cost of $50.00 per hour.

Your final approval of a digital mock-up provided by SOG, which verifies the desired look and location of the custom engraving, is needed before proceeding. If you have questions about whether or not your file format will work, please contact us at customercare[at]

Back to Top


Engraving Policy

  • We are not responsible for any mistakes or misspellings made by our customers.
  • Personalized laser engraved items are not accepted for return.
  • While we accept most engraving requests, we cannot honor every one. Some may contain trademarks or other terms that we do not have the right to use.
  • Others may contain material that we consider inappropriate or simply do not want to place on products. At times this obliges us to decline engraving requests that may otherwise seem unobjectionable. If your engraving request is deemed unacceptable, your order will be canceled and you will be notified via email.
  • SOG reserves the right to cancel any engraving requests after they have been submitted.
  • Prices are subject to change without notice
  • Engraving orders cancelled or changed during production are invoiced for all expenses incurred.
  • Every effort will be made to meet desired color (dark or light mark). However, due to variations in materials and coating, color results can fluctuate.

Back to Top


Turn around time

  • Typically 2-3 business days after final approval (on in stock items).
  • For official time estimates and price quotes please contact SOG Consumer Services at 888-405-6433 x240 .
  • Rush service is available for all in-stock items. Please contact SOG Consumer Services for more information.

Back to Top



All products engraved by SOG remain covered by the full SOG warranty. This does not cover misuse, abuse, or improper use. For more warranty information please visit the Warranty page. Replaced or repaired items under warranty will not be re-engraved.

Back to Top


Trademarks & Copyrights

SOG Knives assumes clients are authorized to use trademarks and copyrighted materials presented to us for reproduction. Customers assume all liability resulting from trademark or copyright disputes.

Back to Top

My Engraving Progress


Text Engraving







Image Engraving


Pattern Engraving


Grand Total
Qty Unit Price Sub Total

SOG Custom Engraving Policy:

Actual engraving may vary slightly from sample image. Every effort will be made to meet desired appearance. However, due to variations in materials and coating, results can vary within a reasonable tolerance.

Final text and image approval is as displayed. Please double-check your spelling as personalized laser engraved items are not accepted for return.

SOG reserves the right to reject any engraving request. Rejected requests may be due to unauthorized trademarks, copyrighted material, or inappropriate text.

Prices are subject to change without notice.

Engraving orders cancelled or changed during production are invoiced for all expenses incurred.

Please agree to terms

For all your questions, inquires please contact our customer service:

PHONE: +1 425-771-6230 |

Your current engraving data is empty

You haven't finished your engraving!

All styles will be lost.